La Crosse Technology 308-807 - Manual (Page 14)

P a g e | 14
Contrast: Select the contrast of the display from level 1 to 16
Saturation:
Select the saturation of the display from level 1 to 16
Radio-Controlled Reception: (This function is not available for this unit. Please keep this setting to
“Off”)
Time Zone: (This function is not available for this unit. Please keep this setting to
“Ohr”)
Time/Date:
Adjust: Year, Month, Date, Hour, Minute
Calendar Display Format:
Select between Day/Month or Month/Day display
Time Format:
Select between 24or 12-hour formats
Alarm:
Adjust the alarm time and enable/disable the alarm
Wireless Sensor Reception:
Automatic – default RF reception mode
Search now – Search for remote sensor immediately
Temperature Unit: Select between degree C & F for temperature
Weather Forecast: Select between sunny, partly cloudy, cloudy, rainy & stormy
Rainfall unit:
Select between mm & inch
Wind unit:
Select between m/s, knots, mph & km/h
Sea Level Pressure:
Adjust the sea level pressure for your local area. (See hPa to inHg conversion
chart in the specifications.)
Pressure Unit:
Select pressure unit between hPa, mmHg, inHg & mb
Remote Channel Display:
Automatic – Show the channel(s) being registered
 Indoor & Channel 1 only – Shows only channel 1 reading
only
 Indoor & Channel 2 only – Shows only channel 2 reading
only
 Indoor & Channel 3 only – Shows only channel 3 reading
only
NOTE: Channel 1 is the Wind/Thermohygro sensor. Channels 2 & 3 are only available if extra
Thermohygro sensors were purchased.
Clear All Rainfall Record Now: Yes / No (clears hourly, daily, weekly, monthly and total rain)
Default Setting:
Yes / No (All settings default back to set up).
S/W Version:
Software version (not upgradeable)