La Crosse Technology 308-807 - Manual (Page 19)

P a g e | 19
REMOTE CHANNEL DISPL AY:
This station has the option of adding two additional thermohygro sensors model W186-Q, 915MHz, for
temperature/humidity readings in different locations. Extra sensors may not be available at this time.
On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down
the third screen to Remote Channel Display. Use the RIGHT ARROW button to choose from:
 Automatic – Show all the channel(s) being registered
 Indoor & Channel 1 only – Shows only channel 1 Thermohygro sensor reading only
 Indoor & Channel 2 only – Shows only channel 2 Thermohygro sensor reading only
 Indoor & Channel 3 only – Shows only channel 3 Thermohygro sensor reading only
Note: Channel 1 is the Wind/Thermohygro sensor. Channels 2 & 3 are only available if extra thermohygro
sensors are available and connected. Additional wind or rain sensors cannot be added to this system.
Press ENTER to confirm.
CLEAR ALL RAINFALL R ECORD NOW:
On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down
the third screen to Clear All Rainfall Record Now. Use the RIGHT ARROW button to choose Yes/No and
press ENTER. This box will appear. Press ENTER again to select the check mark and reset all the
rainfall records to 0.00.
DEFAULT SETTING:
On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down
the third screen to Default Setting. Use the RIGHT ARROW button to choose Yes/No and press ENTER.
This box will appear. Press ENTER again to select the check mark and reset all the settings to their
default numbers. You will need to reprogram the display to your local settings for time, date, and
pressure.
S/W VERSION:
This is informational only on the software used in this display. No other versions of software are available
and there are no upgrade options.
Are you sure you want to clear all rainfall record?
X
Change to default setting?
X