LEICA TPS1200 - Manual (Page 118)

118 TPS1200 Check & Adjust
5.8 Service of the Tripod
Service tripod
step-by-step
The following table explains the most common settings.
Step Description
)
The connections between timber and metal must be firm and tight.
1. Moderately tighten the allen screws (1) with the allen key supplied with the
tripod.
2. Tighten articulated joints just enough to keep the tripod legs open when
lifting the tripod of the ground (2).
3. Tighten the allen screws of the tripod legs (3).
TPS12_029
1 2
3