Lifetime 65004 User Manual
Page 14
14
Tongue Attachment Plates
AA
Center holes in Tongue with
holes in Attachment Plates.
AK
AK
AL
AL
SECTION 3:
PRE-TAKE-HOME ASSEMBLY
Hardware Provided:
Not actual size
Not actual size
AL
AK
%HIRUHWRZLQJ\RXUWUDLOHUKRPH\RXPXVW¿UVWDVVHPEOHWKHWRQJXH<RXPXVWVOLGH
the tongue out and lock it in place before attaching the trailer to your tow vehicle.
**At Least 2 Adults Required for the Following Steps**
3.1. Chock the Tires, front and rear, with bricks or wooden blocks.
3.2.
:KLOHRQHDGXOWVXSSRUWVWKH7UDLOHUUHPRYHWKHWZRCotter Keys (AK) holding
the 1/2”-13 x 4 1/2” Hex Bolts (AL) and Tongue (AA) in place. Remove the two
Bolts and slide Tongue forward from under Trailer Bed until the holes in the Tongue
are centered with the holes in the Tongue Attachment Plates.
Re-insert Cotter Keys
to shaded points as in
illustrations
AL
AL
AK
AK
Use upper hole
Warning: Be careful when removing bolts. Tongue could fall
causing serious injury.
3.3
5HLQVHUWBolts and replace the Cotter Keys to secure the Tongue in place.
Note: If you’ve already towed your new trailer home, skip to the section “Trailer
$VVHPEO\´WRFRQWLQXH
Warning: Do not cut banding around trailer before towing the trailer home. Trailer
parts may fall off causing injury to other motorists.