Lifetime 65004 - Manual (Page 31)

31
Hardware Needed:
(3) BB
(3)
BF
Rubber Mallet
´6RFNHW:UHQFK
Hardware Bag: 1018013
4.5.6 6WDUWLQJDWWKHERWWRPKROHVHFXUHWKH5LJKW5HDU6LGH([WHQVLRQ3DQHOWRWKH
6LGH3DQHODQG5HDU6LGH3DQHO%UDFNHWXVLQJWKUHH  3/8”-16 x 2 1/2” Hex Bolts
(BB)
RQH  3/8” Flat Washer (BD) DQGWKUHH  3/8”-16 Nylock Nuts (BF).
Note: If necessary, after aligning the holes gently tap the Bolts with a Rubber Mallet
or Hammer to help pass them through the holes.
(1) BD
Hardware Bag: 1022647
´:UHQFK
Remember: Tighten all hardware
before proceeding to the next step,
but do not overtighten.
BB
BF
BD
4.5.7 Tighten all hardware from steps 4.2.3 - 4.5.6, but do not overtighten.
BD