Lifetime 65004 - Manual (Page 25)

25
(6) BE
Hardware Needed:
(6)
BF
(4) BB
4.4.2 6WDUWLQJDWWKHERWWRPKROHVHFXUHWKH6LGH3DQHOWRWKH)URQW3DQHOXVLQJWKUHH
 3/8”-16 x 3 3/4” Hex Bolts (BE)WKUHH  3/8” Flat Washers (BD)DQGWKUHH  
3/8”-16 Nylock Nuts (BF).
4.4.3 6WDUWLQJDWWKHERWWRPKROHVHFXUHWKH6LGH3DQHOWRWKH6LGH&HQWHU6XSSRUW
%UDFNHWVXVLQJWZR  3/8”-16 x 2 1/2” Hex Bolts (BB)DQGWZR  3/8”-16 Nylock
Nuts (BF).
4.4.4 Repeat steps 4.4.1 - 4.4.3
IRUWKHRWKHU6LGH3DQHO
Rubber Mallet
BF (4)
´6RFNHW:UHQFK
Hardware Bag: 1018013
Hardware Bag: 1018015
(6) BD
Hardware Bag: 1022647
´:UHQFK
Note: If necessary, after aligning the holes gently tap the Bolts with a Rubber Mallet
or Hammer to help pass them through the holes.
DO NOT
COMPLETELY
TIGHTEN THE
NYLOCK NUTS YET.
BF
BE
BF
BB
BD