Lifetime 65004 - Manual (Page 71)

71
bearings.
• After removing the grease cap, cotter pin, spindle nut and spindle washer,
remove the hub and drum to inspect the bearings for wear and damage.
‡5HSODFHEHDULQJVWKDWKDYHÀDWVSRWVRQUROOHUVEURNHQUROOHUFDJHVUXVWRU
pitting. Always replace bearings and cups in sets. The inner and outer bearings
are to be replaced at the same time.
• Replace seals that have nicks, tears or wear.
‡/XEULFDWHWKHEHDULQJVZLWKDKLJKTXDOLW\(3DXWRPRWLYHZKHHOEHDULQJ
grease.
Every time the wheel hub is removed and the bearings are reassembled, follow the
steps below to check the wheel bearings for free running and adjust.
• Turn the hub slowly, by hand, while tightening the spindle nut, until you can no
longer turn the hub by hand.
‡/RRVHQWKHVSLQGOHQXWMXVWXQWLO\RXDUHDEOHWRWXUQLW WKHVSLQGOHQXW E\
hand. Do not turn the hub while the spindle nut is loose.
• Put a new cotter pin through the spindle nut and axle.
• Check the adjustments. Both the hub and the spindle nut should be able to
PRYHIUHHO\ WKHVSLQGOHQXWPRWLRQZLOOEHOLPLWHGE\WKHFRWWHUSLQ 
11.2.9 Lug Nuts (Bolts)
/XJQXWVDUHSURQHWRORRVHQULJKWDIWHUDZKHHOLVPRXQWHGWRDKXE:KHQGULYLQJ
RQDUHPRXQWHGZKHHOFKHFNWRVHHLIWKHOXJQXWVDUHWLJKWDIWHUWKH¿UVWDQG
50 miles of driving and before each tow thereafter.
WARNING
Lug nuts are prone to loosen after initial installation, which can
lead to death or serious injury.
&KHFNOXJQXWVIRUWLJKWQHVVRQDQHZWUDLOHURUZKHQZKHHO V 
KDYHEHHQUHPRXQWHGDIWHUWKH¿UVWDQGPLOHVRI
driving.
WARNING
Metal creep between the wheel rim and lug nuts will cause rim to
loosen and could result in a wheel coming off, leading to death or
serious injury. Tighten lug nuts before each tow.