Perform encoder test, Code is above 10562, Perform – Lincoln Electric POWER MIG SVM160-B User Manual
Page 70: Encoder test, 10562 perform, Troubleshooting & repair, Encoder pc board test, Warning
ENCODER PC BOARD TEST
(FOR CODES ABOVE 10562)
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
This test will help determine if the encoders are functioning properly for machines above code
10562 only.
MATERIALS NEEDED
Volt/Ohmmeter (analog recommended)
5/16" Nut driver
TROUBLESHOOTING & REPAIR
F-26
F-26
POWER MIG 300
WARNING