Lincoln Electric POWER MIG SVM160-B - Manual (Page 77)

TROUBLESHOOTING & REPAIR
F-33 F-33
POWER MIG 300 Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
POWER MIG 300 SCROLLING DASHES TEST (continued)
TEST PROCEDURES:
For Machines with code 10952, 10958
and 11000.
1. Hold “select” switch up while powering up
machine.
2. Release “select” switch when displays show
“PrESSPin”.
3. Turn the right “encoder knob” until displays
show “CLrAll”.
4. Toggle the “select” switch up and release.
5. Machine will reset itself.
For Machines with code 10562.
1. Hold “select” switch up while powering up
machine.
2. Continue to hold “select” switch up and turn
right “encoder” until display reads “CLrAll”.
3. Release the “select” switch.
4. Machine will reset itself.