Land Pride DM36 Series - Manual (Page 12)

10
Section 1 Assembly and Set-Up
DM36 Series Disc Mowers 327-045M 5/5/08
Land Pride
Table of Contents
Support Stand
Figure 1-4
20765
Belt Cover and Pulleys Assembly
Refer to Figure 1-3:
1. Assemble the inner guard (#11) and the guard
reinforcement (#1) to the disc mower with the 3/8” X 1”
long bolts (#4) and flat washers (#6).
2. Install pulleys (#8) and (#9) as shown and secure with
keys (#2).
3. Install belt (#10) to pulleys. Pulley (#8) may need to be
adjusted so pulley can be assembled. Refer to “Belt
Tension Adjustment” on page 17.
Support Stand Assembly
Refer to Figure 1-4:
Insert stand into tube on the hitch as shown and secure
with pin and hair pin cotter.
Cutting Unit
Figure 1-3
20767