Land Pride DM36 Series - Manual (Page 22)

20
Section 4 Maintenance and Lubrication
DM36 Series Disc Mowers 327-045M 5/5/08
Land Pride
Table of Contents
Storage
At the end of the working season or when the mower will
not be used for a long period, it is good practice to clean off
any dirt or grease that may have accumulated on the
mower and any of the moving parts.
1. Clean the Disc Mower as necessary.
2. Check the blades and blade fasteners for wear and
replace if necessary, see “Servicing Blades”, Page
18.
3. Inspect the mower for loose, damaged or worn parts
and adjust or replace as needed.
4. Lubricate as noted in “Section 4 Maintenance and
Lubrication” on page 18.
5. Release tension on drive belts.
6. Move stroke control to disconnect position.
7. Store cutter bar in horizontal (operating) position.
8. Store the Disc Mower inside if possible for longer Disc
Mower life.
9. Repaint parts where paint is worn or scratched to
prevent rust.