Land Pride DM36 Series User Manual
Page 24
22
Section 4 Maintenance and Lubrication
DM36 Series Disc Mowers 327-045M
5/5/08
Land Pride
Cutter Bar
Check oil level in the cutter bar by removing the filler level
plug with cutter bar in transport position. (The plug is located
between the first and second discs on the DM3605 and
between the second and third discs on DM3606 and
between the second and third discs on DM3607.) If the oil
level is low, add oil.
Type of Lubrication: SAE 90 GL4 (EP) gear lube
Quantity =fill until level with in filler level plug hole.
NOTE: Do not overfill. Mower should be level and
cutter bar vertical when checking oil. Be sure to let
cutting bar set in vertical position for a few minutes
before checking to allow time for oil to flow to the
bottom of bar.
As
Required
Frame Pivot Point
Type of Lubrication: Grease
20
20772
20763
Hitch Pivot Point
Type of Lubrication: Grease
20
20763