La Crosse Technology WS-9210U - Manual (Page 10)

10
7. Press and release the “SET” button to confirm the minutes and to
advance to the Day, Date, and Year setting mode.
Note: In 12h mode, “PM” will appear to the left of the time during PM
hours. If the time is not within the PM hours, nothing will be displayed.
Be sure to set the time to the correct AM/PM time to ensure automatic
reception at optimal times.
VII. SETTING THE DAY, DATE, AND YEAR
1. Press and hold the “SET” button for 3 seconds, or until “12 h” or “24
h” flashes in the DATE LCD.
2. Press and release the “SET” button 5 more times to reach the
Weekday setting mode.
Note: “MO” (representing Monday) is the default setting for the
weekday, “1.1” is the default setting for the numeric month and day, and
“1999” is the default setting for the year. The day, date, and year will be
automatically set once the WWVB signal is received. However, the day,
date, and year can be manually set and will flash respectively in the
DATE LCD during manual programming.
3. The weekday will be flashing in the
DATE LCD, press and release the
“CH” button to change the weekday.
4. Press and release the “SET” button
to confirm, and to enter the numeric-
month setting mode.
5. The numeric-month will be flashing in
the DATE LCD. Press and release the
“CH” button to select to the current
month.
6. Press and release the “SET” button to confirm the numeric-month,
and to enter the numeric-day setting mode.
7. The numeric-day will be flashing,
press and release the “CH” button to
select the current day.
8. Press and release the “SET” button to
confirm and to enter the year setting
mode.
9. The default-year will be flashing, press and release the “CH” to
select the appropriate year.
10. Press and release the “SET” button to confirm and to advance to the
°F or °C setting mode.