La Crosse Technology WS-9210U - Manual (Page 7)

7
PROGRAM MODE
Programming Note: If 30 seconds are allowed to pass or either the IN or the OUT
button is pressed during programming modes, the unit will set the last information
entered—the display will stop flashing and return to normal time-date readings. If
you don’t leave the program mode during the programming of sections III through
IX, you can advance to step 3 of the next program setting. If you do leave the
program setting (or want to program a specific setting) follow each instructional
step to program that setting.
I. PROGRAMMING SEQUENCE
The sequence for programming the indoor weather station and the default (factory)
settings are:
1. 12/24 hour time setting 12 hour
2. Time Zone Zo -5 (eastern)
3. Daylight Saving Time 1 (on)
4. Time – hour 12
5. Time – minute 00
6. Date – day of the week mo (Monday)
7. Date – month 1 (January)
8. Date – day of the month 1
9. Date – Year 1999
10. Temperature °F
11. LCD (liquid crystal display) contrast 5
12. End of sequence
The programming instructions are given in a manner so that each setting is done
separately. On initial set-up and after inserting new batteries to program all
functions simply disregard the first two steps of each section starting with the Time
Zone Setting.
II. FUNCTION KEYS
The function keys are operated by pressing the key
corresponding to the operation that you want to perform.
III. 12 OR 24 HOUR TIME SETTING
1. Press and hold the “SET” button for 3 seconds or until “12 h” flashes
in the DATE LCD.