LG RC897T - Manual (Page 11)

11
CONNECTION AND SETTING
Connections to your TV (Component) Connections to your TV (Component)
Make one of the following connections, depending on the capabilities of your TV.
RF coaxial connection
Connect the ANTENNA OUT jack on the Recorder to the antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
Component Video connection
If your television is a high-definition or “digital ready” television, you may take advantage of the Recorder’s pro-
gressive scan output for the highest video resolution possible.
Connect the COMPONENT OUTPUT jacks on the Recorder to the corresponding in jacks on the TV using an
optional Y P
B P R cable (C).
Set the resolution to 480p using RES. button on the front panel for progressive signal.
Progressive Scan does not work with the RF, Video or S-Video connections.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
Audio connection
Connect the Left and Right AUDIO OUTPUT jacks on the Recorder to the audio left/right in jacks on the TV using
the supplied audio cables (A2).
Notes Notes
Rear of Recorder
Rear of TV
Y Pb Pr
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
L R
AUDIO INPUT
A2 C
R
White Red
Green Blue Red
Green Blue Red
White Red