LG RC897T - Manual (Page 65)

65
REFERENCE
T T roubleshooting roubleshooting
General
The power does b Plug the power cord into the wall outlet securely.
not turned on.
There is no picture. b Select the appropriate video input mode on the TV so the picture from the unit appears on the
TV screen.
b Connect the video connection securely.
Picture noise b You are playing a disc recorded in a color system that is different form your TV.
appears. b The video signal from the external component is copy-protected.
b Set the resolution that your TV can accept.
The channel is not b Check your antenna connection.
found or stored.
There is no sound. b Connect the audio connection securely.
b The input source setting on the amplifier or the connection to the amplifier is incorrect.
b The unit is in scan, slow motion, or pause mode.
b Try to select another audio channel or source using AUDIO button.
b If the audio signal does not come through the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack,
check the “Audio” setup setting (page 14, 53).
The remote control b The remote control is not pointed at the remote sensor of the unit.
does not work b The remote control is too far from the unit.
properly. b There is an obstacle in the path of the remote control and the unit.
b The batteries in the remote control are exhausted.
b The remote’s manufacturer code returned to the default setting when you replaced the batteries.
Reset the code (page 13).
Playback
The unit does not b Insert a playable disc.
start playback. (Check the disc type, color system, and regional code.)
b Place the disc with the playback side down.
b Place the disc on the disc tray correctly inside the guide.
b Clean the disc.
b Cancel the Rating function or change the rating level.
Cannot play a tapes. b Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.)
cannot be played.
The picture is not clear. b Adjust the tracking by the CH/TRK + - button (see page 43).
The video head are dirty. Clean the video head using a video head cleaning
cassette. If the cleaning cassette is not available in your area, have the heads cleaned at your
nearest dealer (a standard service fee will be charged). Do not use a commercially available
liquid type cleaning cassette, as it may damage the video heads.
b The video heads may have to be replaced. Consult your local dealer for more information.
b The tape is defective.
Cannot play a disc b Finalize the disc (see page 58).
recorded using this b Check the disc compatibility of the player.
unit on other player. b Place the disc on the disc tray correctly inside the guide.
b Discs recorded with copy-once material cannot be played on other players.
The angle cannot be b Multi-angles are not recorded on the DVD Video being played.
changed. b The angle cannot be changed for the titles recorded on this unit.
The subtitle language b Subtitles are not recorded on the DVD Video being played.
cannot be changed or b The subtitle cannot be changed for the titles recorded on this unit.
turned off.
Cannot play MP3/WMA/ b The files are not recorded in a format that the unit can play.
JPEG/MPEG4 files.
b The unit does not support the codec of the MPEG4 movie file.
b The resolution is higher than the unit can support.