Lexmark Z82 - Manual (Page 80)

Run CLEAN CAR. to clean the printheads.
A test line prints so that you can see if the cleaning process was
successful.
Clean the printheads:
● When you suspect the printheads are clogged.
● When characters are not printing completely.
1) Press the Setup button until
CARTRIDGE appears in the display.
2) Press
➛☎or ❿☎
until CLEAN CAR.
appears in the second row of the
display.
3) Press the Enter/Select button.
The printer prints the printheads
cleaning test page.
4) If the printheads cleaning test
page still contains broken lines,
see ‘To wipe the
printheads’ on page 8-5.
Troubleshooting 8-4
C
leaning Your Printer
Chapter 8
The following sections take you through the process of cleaning
the print cartridge printheads.
The printer returns to Ready Mode after
the test page.
To clean the printheads
[CARTRIDGE]
❿CHANGE CAR.
[CARTRIDGE]
❿CLEAN CAR.
PRINTING
■■■