Lexmark Z82 - Manual (Page 84)

Troubleshooting 8-8
A
djust Shading
Chapter 8
The shading is adjusted at the factory. However, if you
accidentally drop the machine, you may want to adjust shading
for optimized lightness.
1
Place your original document face down on the Scanner Bed with
the top left of the original to the green mark (
), and close the
Printer Top Cover.
2
Press the Setup button until
MAINTENANCE appears in
the display.
3
Press
➛ or ❿ until ADJUST
SHADING? appears in the
second row of the display.
4
Press the Enter /Select button.
5
Press Enter/Select again
when prompted by ARE YOU
SURE?
The machine scans and
adjusts the shading.
[MAINTENANCE]
❿ADJUST SHADING?
ARE YOU SURE?
Y:ENTER N:STOP
SHADING
■■■
[MAINTENANCE]
❿HELP LIST
❿