Lyngdorf Audio TDAI 2200 - Manual (Page 22)

2 2
Display
The sub menus accessible in the Display menu are:
Display Timeout
Display timeout set-up is used for enabling/disabling the 10 sec. display ’switch’off’ feature. If enabled
the Main Display reading will switch off after 10 sec of inactivity from the remote control or front panel
buttons.
Disp. Brightness
Display brightness is used to control the brightness of the display. The brightness can be set to 25%,
50%, 75% and 100%.
Volume Disp. Timeo.
If Volume Display Timeout is enabled the Volume Display reading will switch off after 10 sec of inactivity
from the remote control or front panel buttons.
Volume Disp.Timeo. Display Timeout Disp. Brightness
Display