Windows vista, Access the mapped drive, Install the usb storage device – Linksys E2100L User Manual
Page 48: Access the usb storage device
Linksys E2100L
Appendix B: How to Install and Access USB Storage
45
Advanced Wireless-N Router
6 . Click Finish .
Click Finish
Access the Mapped Drive
1 . On your desktop, click the Windows Explorer icon .
Windows Explorer Icon
NOTE:
If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer .
2 . Double-click the mapped drive to access it .
Double-Click Mapped Drive
Windows Vista
Install the USB Storage Device
1 . Make sure your computer has a wired or wireless
connection to the Router .
2 . Connect an external USB hard disk drive or USB flash
drive to the USB port of the Router .
Internet
Ethernet
4
3
2
1
Power
12VDC
USB
Access the USB Storage Device
1 . On your desktop, double-click the Computer icon .
Computer Icon
NOTE:
If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer .
2 . In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1 . You can change this IP
address on the Setup > Basic Setup screen; refer to
Setup > Basic Setup, page 11 .
Enter Local IP Address of Router