Mac os x, Access the mapped drive, Install the usb storage device – Linksys E2100L User Manual
Page 53: Access the usb storage device
Linksys E2100L
Appendix B: How to Install and Access USB Storage
50
Advanced Wireless-N Router
Access the Mapped Drive
1 . On your desktop, double-click the My Computer icon .
My Computer Icon
NOTE:
If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer .
2 . Double-click the mapped drive to access it .
Double-Click Mapped Drive
Mac OS X
Install the USB Storage Device
1 . Make sure your computer has a wired or wireless
connection to the Router .
2 . Connect an external USB hard disk drive or USB flash
drive to the USB port of the Router .
Internet
Ethernet
4
3
2
1
Power
12VDC
USB
Access the USB Storage Device
1 . From your desktop, select Go > Network .
Select Go > Network
2 . Double-click the server name .
NOTE:
If you used the setup software to install
your Router, then the name of your wireless
network will be the server name (up to 15
characters) . If not, the name will appear as
Ciscoxxxxx (xxxxx represents the last five digits
of the Router’s serial number .)
Double-Click Ciscoxxxxx
NOTE:
It may take a few moments before the
Router is detected . Please wait .