Linksys E2100L - Manual (Page 7)

Linksys E2100L Chapter 2: Cisco Connect
4 Advanced Wireless-N Router
5 . The connection steps are displayed .
Connection Overview
a . Plug the power cord into the Power port on the
back of the Router .
Internet Ethernet 4 3 2 1 Power 12VDC USB
Connect to Power Port
b . Plug the power adapter into an electrical outlet .
Connect to Electrical Outlet
c . Unplug the existing Ethernet cable from your
computer and plug it into the yellow port labeled
Internet on the back of the Router . Click Next .
Internet Ethernet 4 3 2 1 Power 12VDC USB
Connect Ethernet Cable
NOTE: You can view detailed connection steps
by clicking in the setup software .
NOTE: If the setup software detects multiple
routers, then select the serial number of your
Router . The serial number is located on the
left side of the product label, which is on the
bottom of the Router .
6 . Please wait while the setup software is setting up the
Router .
Please Wait