LightSpeed Technologies CAT 860 - Manual (Page 9)

16 17
1. Overview
2. Setup & Use
3. Optional Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
1. Overview
2. Setup & Use
3. Optional Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
2. IR SENSOR/RECEIVER (ISR) INSTALLATION
Next, find a suitable location for the ISR. Poor location will cause substandard
performance of the CAT 860 Classroom Audio System. The ISR should be as
high as possible in the room – the ceiling is the best location, centered along the
longest wall in the room. When possible, use a conduit to protect the wires (not
included). Poor choices for placement are corners, on walls at heights lower than
7 feet (2 meters), or in places where the line of sight from the ISR to the receiver
is or could be obstructed.
Good placement
Conduit is Recommended
Best placement
Avoid!
First, find a suitable location to set-up the amplifier. It is best to put the amplifier
in a stable location near the other equipment to be used. It can be set in a
cabinet, on a tabletop, or mounted on the wall with the included bracket.
Media Cabinet Set-up
The included wall bracket is
specifically designed to support the
CAT 860.
Wall-mount Set-up
SECTION 2:
SET-UP & USE
1. LOCATION OF THE AMPLIFIER
Avoid Separated Set-ups
Components should be housed
together. Wires should be routed
back directly to the amplifier.