LEICA ASP300 - Manual (Page 27)

27 Leica ASP300
4.7.2. Access control
The Leica ASP300 may be configured to allow two levels of user ac-
cess.
Operator access level:
• Operators may run programs and view results. On this level, the OP-
ERATOR symbol is displayed in the upper right corner of the touch
screen.
Supervisor access level:
• Supervisors may perform all Operator functions, and additionally cre-
ate programs and perform the instrument sit-up functions.
• To access Supervisor level, press SUPERVISOR, enter the required
password and confirm. The SUPERVISOR symbol will then be dis-
played instead of the OPERATOR symbol and all enabled buttons will
be surrounded by a black border instead of a blue one.
Lock feature against unauthorized use
• The Leica ASP300 provides a feature called "Lock" to prevent ac-
cess to any operations of the Leica ASP300 to unauthorised users.
• The ‘Lock’ mode and the corresponding ‘Lock’ password are config-
ured from the SYSTEM SETUP menu.
4. Setting up the instrument
‘Operator’ symbol
‘Supervisor’ symbol
→