LEICA ASP300 - Manual (Page 40)

40 Instruction manual V 1.3 – 12/2003
5. Operation
5.2.3 Viewing the program list
This list ( Fig. 20 ) displays all programs currently existing in the
ASP300.
You can create:
• up to 15 processing programs,
• 3 retort cleaning programs,
• 1 wax cleaning program.
At supervisor access level:
• the processing program names
can be edited,
• new processing programs can
be created and existing ones
can be deleted.
Important!
New processing programs are created by copying existing
ones. Therefore, the list must contain at least one program at all
times.
• Program duration cannot be edited directly.
• To alter the duration of a program, the duration of one or more indi-
vidual program steps has to be modified.
Retort and wax cleaning programs are predefined and cannot
be altered.
Fig. 20
→