Warning – Land Pride Z52 User Manual
Page 2
2
Manual No. 356-537M
06/28/07
Land Pride
Assembly Instructions
■
ccu-Vac Assembly
!
WARNING
Do not operate mower without deflector chute or Accu-Vac in place.
Mower Deck Preparation
Park the Accu-Z mower on a flat surface. Shut off the ignition
switch and remove the key from the switch. Disconnect the
negative battery cable.
Refer to Figure 1
4.
Before the Accu-Vac can be installed, the right side pulley
cover (4) and discharge chute assembly (1) must be
removed. Loosen the tensioner for the blade belt and remove
pulley (7). Parts 2, 3, 6 and 8 will be used to assemble Accu-
Vac.
NOTE: Retain all other parts as they will be re-installed when the
Accu-Vac is removed.
lower, Pulley and Pulley Cover Assembly
Refer to Figure 2
19907
Figure 1
Chute, Pulley and Pulley Cover Removal