Caution – Land Pride Z52 User Manual
Page 4
4
Manual No. 356-537M
06/28/07
Land Pride
Assembly Instructions
■
Bagger Assembly
Refer to Figure 4
1.
Remove and retain rear bumper bolts (3) and flat
washers (4). Do not remove bumper.
2.
Assemble left bracket (1) and right bracket (2) through
the same slots using the bolts and flat washers
retained from the bumper.
!
CAUTION
Muffler can cause burning. Muffler should be cool before pro-
ceeding. NOTE: 2 different size deflectors provided ( Honda
takes 1 1/4" ID)( Kawasaki takes 1 1/8" ID)
3.
Position muffler deflector (5) on existing muffler
exhaust so that deflector is pointing away from the
plastic containers. Mark for hole through deflector (5)
and drill hole for screw using a #26 (.147) drill bit.
4.
Install appropriate muffler deflector to existing exhaust
and fasten with screw (6) through hole in deflector and
drilled hole.
19910
Figure 4
Bagger Brackets and Muffler Deflector Assembly