Assembly instructions – Land Pride Z52 User Manual
Page 6
Advertising
6
Manual No. 356-537M
06/28/07
Land Pride
Assembly Instructions
■
Front Lift and Weight Assembly
(For Blade Service or Replacement)
IMPORTANT: Do not use jack to work under deck.
Refer to Figure 6
1.
The front weight bracket (#1) will mount to the front of
the mower frame with the four u-bolts (#2) lock
washers (#3) and nuts (#4) on the Z60 & Z72 mowers.
The Z52 mounts with two u-bolts (#2) on the right side
and one bolt (#7) and nut (#4) on the left side of frame
as shown in Figure 6.
2.
Fill the weight (#5) with sand and secure to weight
bracket with bolts (#8), lock washers (#9) and flat
washers (#10).
3.
Assemble jack (#6) if kit is so equiped to the jack
mount on the weight bracket.
Figure 6
Front Lift and Weight Assembly
Z52 Left Side
Advertising