Lenoxx Electronics PH568 - Manual (Page 13)

IB-PH568-WM-E-040506
TELEPHONE BASICS
ANSWERING CALLS
1. After the phone rings, the LINE 1 or LINE 2 indicator will flash to indicate you which is the
incoming call line.
2. Pick up the handset or press the SPEAKERPHONE button.
3. To end the call, replace the handset on the base or press the SPEAKERPHONE button again.
VOLUME CONTROL AND RINGER SETTING
MAKING CALLS
1. Pick up the handset or press the SPEAKERPHONE button to get a dial tone, the line 1
indicator lights up, this indicates that you will make a call by line 1, you can also select
to make a call by using line 2 by pressing the LINE 2 button, the LINE 2 indicator lights
up (if you connected two lines).
2. Dial your call.
3. To end the call, replace the handset on the base or press the SPEAKERPHONE button again.
Adjust the ringer level
Set RINGER HI/LO/OFF switch.
HI - loud rings on incoming calls.
LO - lower rings on incoming calls.
OFF - no ringing on incoming calls.
Adjust the speakerphone volume
Slide the SPEAKERPHONE VOLUME control (on the
right side of the phone).
11
Adjust the handset volume Slide the handset VOLUME control (loud or normal).
USING THE OTHER LINE DURING A CONVERSATION
During a conversation, if another line indicator flashes and you hear a click, an incoming call
is being received on the line, you can answer the second call while holding the first call. You
can also make a call without terminaling the first call. If you subscribe a caller ID service, the
second caller’s information will be displayed when a call is being received on the other line.
1. Press the HOLD button to put the first call (LINE 1) on hold, the LINE 1 indicator flashes.
2. Press the another line button (LINE 2) to answer or make a second call, the LINE 2
indicator lights up.
3. To return to the first call (LINE 1), press the line button (LINE 1) for the first call.
NOTE: If you want to hold the second call, please press the HOLD button before pressing
the LINE button of the first call.
CONFERENCE CALL
During a conversation, you can answer or make a second call on the other line and then
combine both calls together to make a conference call.
1. Press the HOLD button to put the first call (LINE 1) on hold, the LINE 1 indicator flashes.
2. Press the another line button (LINE 2) to answer or make a second call, the LINE 2
indicator lights up.
3. When the second call is connected, press the CONFERENCE button to start the conference
call, both indicators light up.
NOTE:
To hang up both lines, place the handset on the cradle or press the SPEAKERPHONE button.
To hang up one line (example: LINE 1), press the line button you want to continue talking
with (LINE 2).
To hold both lines, press the HOLD button.
To resume to talk with one line, press the corresponding line button.
To resume to talk with both lines, press the CONFERENCE button.
IB-PH568-WM-E-040506(RTT).pmd 7/4/2006, 4:28 PM 13