LEICA GPS1200 - Manual (Page 17)

Description of the System
GPS1200+
17
Software upload
All instrument software is stored in the System RAM of the receiver. The software
can be uploaded onto the receiver using the following methods:
• Using LGO the software is transferred via the serial interface to the Compact-
Flash card in the receiver, which is then stored to the System RAM.
• By connecting the CompactFlash card directly to the computer either via an
internal card slot housing or an external OMNI drive, the software is trans-
ferred to the card, which is then stored to the System RAM.
Application
programs A suite of optional survey-specific application programs are
available for the instrument.
Some of the programs are activated freely and require no license
key and others require purchasing and are only activated with a
license key.
Customised
application
programs Custom software specific to user requirements can be developed
using the GeoC++ development kit.
Information on the GeoC++ development environment is avail-
able on request from a Leica Geosystems representative.
RX1200
software For RX1210 and RX1210T. This software covers display, sound
and communication settings of the RX1210 and RX1210T.
Software type Description