LEICA GPS1200 - Manual (Page 40)

40 GPS1200+ Operation
3. With the Leica logo facing upwards, slide the battery into the battery
compartment and push upwards so that it locks into position.
4. Close the cover of the battery compartment and tighten the screw.
5. Repeat steps 2. to 4. for the second battery compartment.
6. To remove a battery, loosen the screw to open the cover of the battery
compartment.
7. Push the battery slightly in and at the same time downwards. This releases
the battery from its fixed position.
8. Pull out the battery.
9. Close the cover of the battery compartment and tighten the screw.
10. Repeat steps 6. to 9. for the second battery compartment.
Step Description