Link electronic Wireless 802.11g AP Router - Manual (Page 24)

User’s Guide 23
frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to
acknowledge the right to begin transmission.
Fragmentation Threshold: This value specifies the maximum size for a packet before data is
fragmented into multiple packets. It should remain at its default setting of 2346. If you experience a
high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the
Fragmentation Threshold too low may result in poor network performance. Only minor modifications of
this value are recommended.
AP Mode or Wireless Bridge Mode: 802.11g AP Router can operate in two modes. When the AP
Mode is selected, the device operates as a normal Access Point. Proving every wireless client station
a join network point.
The Wireless Bridge Mode will be able to join different AP Router wirelessly by input the destination
MAC Address.
* Click Apply to save your settings.