Link electronic Wireless 802.11g AP Router - Manual (Page 34)

User’s Guide 33
Resolution:
§ Make sure that each computer has a unique IP Address. If using DHCP through the AP Router,
makes sure that each computer is enable DHCP function and restart the computer.
§ Make sure that the Link LED is on. If it is not, try a different network cable.
§ Check each computer for correct network settings.
Wireless Troubleshooting
I can’t access the Wireless AP Router from a wireless network card
Cause:
§ Out of range.
§ IP Address is not set correctly.
Resolution:
§ Make sure that the Mode, SSID, Channel and encryption settings are set the same on each
wireless adapter.
§ Make sure that your computer is within range and free from any strong electrical devices that may
cause interference.
§ Check your IP Address to make sure that it is compatible with the Wireless AP Router.