Lancom Systems 7111 VPN - Manual (Page 24)

LANCOM 7111 VPN – LANCOM 8011 VPN
̈ Chapter 2: Installation
24
EN
2.3.2 The back of the unit
Ports and switches of the router are placed on the front and back:
The following ports can be found on the front side:
ᕡ Four 10/100Base Tx ports for local networks
ᕢ WAN port
ᕣ
ISDN/S
0
port
ᕤ
Serial configuration interface
ᕥ
Reset switch
The following ports can be found on the back:
ᕦ Voltage Switch
ᕧ Port for power cable
2.4 Hardware installation
The installation of the LANCOM router base station takes place in the follow-
ing steps:
ቢ Mounting – If desired, mount the device into a free slot of a 19” rack.
LANCOM 8011 VPN WAN ISDN COM ETH4 ETH3 ETH2 ETH1
³ · » ¿ ´
The reset switch has two different functions depending on the length of time that it is
pressed:
̈ Restarting the device (soft reset) – push the button for less than five seconds. The
device will restart.
̈
Resetting the configuration (hard reset) – push the button for more than five seconds.
All the device's LEDs will light up green and stay on. As soon as the reset switch is
released, the device will restart with factory default settings.