Lancom Systems 7111 VPN - Manual (Page 53)

LANCOM 7111 VPN – LANCOM 8011 VPN
̈ Chapter 6: Providing dial- up access
53
EN
The required network numbers are designated as “External Network Num-
bers”. Like IP network addresses, they apply to an entire LAN segment. On the
other hand, internal IPX numbers are used to address specific Novell servers
in the LAN. All three specified network numbers must be distinct from one
another and from all used internal IPX network numbers.
In addition, it may be necessary to enter the frame type (“binding”).
Specifying the IPX network number and binding used is not necessary if the
remote network also contains a Novell server. A network number for the WAN
must also be entered manually in this case, however.
6.1.4 Settings for NetBIOS routing
All that is required to use NetBIOS is the name of a Windows workgroup from
the router's own LAN.
The connection is not established automatically. The RAS user must
manually establish a connection to the LANCOM router via Dial-Up
Networking first. When connected, they can search for and access
computers in the remote network (via Find
̈
Computers, not
through the Network Neighbourhood).
LAN of the head office
IPX network no.: 00000001, Binding: Ethernet_II
(0123) 123456
WAN
IPX network no.:
00000009
IPX internal net:
00020002
Remote
workstation
ISDN adapter
User: 'SAMPLE'
(0123) 777888
VPN or ISDN
connection