Lancom Systems LCOS 3.50 - Manual (Page 288)

LANCOM Reference Manual LCOS 3.50 ̈ Chapter 13: Server services for the LAN
288
Server servic
es for
th
e
LA
N
13.4.1 Setting up the SYSLOG module
13.4.2 Example configuration with LANconfig
Create SYSLOG client
ቢ Start LANconfig. Under 'Management', select the 'Log & Trace' tab.
ባ Turn the module on and click SYSLOG clients.
ቤ In the next window click Add....
ብ First enter the IP address of the SYSLOG client, and then set the sources
and priorities.
SYSLOG comes from the UNIX world, in which specified sources are pre-
defined. LANCOM assigns its own internal sources to these predefined
SYSLOG sources, the so-called “facilities”.
The following table provides an overview of the significance of all news
sources that can be set in the LANCOM. The last column of the table also
Configuration tool Run/Table
LANconfig Management ̈ Log & Trace
WEBconfig Expert Configuration ̈ Setup ̈ SYSLOG-module
Terminal/Telnet cd /setup/SYSLOG-module