Lancom Systems LCOS 3.50 - Manual (Page 50)

LANCOM Reference Manual LCOS 3.50 ̈ Chapter 5: Diagnosis
50
Di
ag
nosis 5.2.4 Combination commands
Any appended parameters are processed from left to right. This means that it
is possible to call a parameter and then restrict it.
NetBIOS NetBIOS management
DNS Domain Name Service Protocol
Packet dump display of the first 64 bytes of a package in hexadecimal form
D-channel-dump trace on the D channel of the connected ISDN bus
ATM spoofing at the ATM packet level
ADSL ADSL connections status
VPN-Status IPSec and IKE negotiation
VPN-Packet IPSec and IKE packets
SMTP-Client E-Mail processing of the integrated mail client
SNTP Simple Network Time Protocol information
This parameter... ... brings up the following display for the trace:
This combination
command... ... brings up the following display for the trace:
All all trace outputs
Display status and error outputs
Protocol LANCOM and PPP outputs
TCP-IP IP-Rt., IP-RIP, ICMP and ARP outputs
IPX-SPX IPX-Rt., RIP, SAP, IPX-Wd., SPX-Wd., and NetBIOS outputs
Time displays the system time in front of the actual trace output
Source includes a display of the protocol that has initiated the output in
front of the trace