Lancom Systems LCOS 3.50 - Manual (Page 29)

̈ Chapter 3: Configuration and management LANCOM Reference Manual LCOS 3.50
29
Configu
rat
ion
a
n
d
ma
na
ge-
men
t
3.5.5 Examples
3.6 Working with configuration files
The current configuration of an LANCOM can be saved as a file and reloaded
in the device (or in another device of the same type) if necessary.
Additionally, configuration files can be generated and edited offline for any
LANCOM device, firmware option and software version:
Backup copies of configuration
With this function you can create backup copies of the configuration of your
LANCOM. Should your LANCOM (e.g. due to a defect) lose its configuration
data, you simply reload the backup copy.
This code... ... in combination with the trace causes the following:
trace displays all protocols that can generate outputs during the config-
uration, and the status of each output (ON or OFF)
trace + all switches on all trace outputs
trace + protocol dis-
play switches on the output for all connection protocols together with
the status and error messages
trace + all - icmp switches on all trace outputs with the exception of the ICMP proto-
col
trace ppp displays the status of the PPP
trace # ipx-rt display toggles between the trace outputs for the IPX router and the dis-
play outputs
trace - time switches off the system time output before the actual trace output