Lionel Trains 71-8340-250 - Manual (Page 15)

15
Odyssey System operations
Turning off the Odyssey System in the conventional environment
F ollow these steps to turn off the Odyssey System in the conventional environment.
1. While the locomotives are in neutral, turn your controller up to the maximum power (no
more than 19 volts), wait one second, then press and hold the horn button.
2. While holding the HORN button, slowly reduce the track voltage to approximately one-third
or one-half of the full power.
3. Release the HORN button.
4. Move the locomotive set in forward OR reverse. The locomotive set is now out of speed
control mode.
Sliding the Odyssey System switch to the NO ODY position will disable the Odyssey
System. We recommend that you keep the Odyssey System switch in the NO ODY
position unless you want to activate the locomotive’s speed control.
Note!