Lionel Trains 71-8340-250 - Manual (Page 18)

TrainMaster Command Control operations
CAB-1 Remote Controller commands
T he CAB-1 Remote Controller commands are detailed below. The corresponding
RailSounds sound system effects are in bold italic type.
Releases the front coupler.
Coupler release sound.
Releases the rear coupler.
Coupler release sound.
Activates the numeric keypad.
Air release sound.
Toggles the headlight on and off.
Accelerates the locomotive set with a clockwise rotation.
Decelerates the locomotive set with a counter-clockwise
rotation.
Shuts down all PowerMasters on your railroad. Stops all
TrainMaster Command Control-equipped locomotive
sets in operation. Use HALT only in emergency situations.
Activates the locomotive set’s horn. Release the button to
discontinue the sound. Multihorn diesel horn
sound.
Toggles the bell sound on and off. Mechanical bell
sound.
Changes the locomotive set’s direction. The locomotive set
decelerates to a stop and continues in the opposite direction
when you increase the throttle. Air release sound.
Increases the locomotive set’s speed while the button is pressed. Release the button to
return to the initial speed.
Decreases the locomotive set’s speed while the button is pressed.
Squealing brake sounds.
18
SET L M H