Lincoln Electric LN-10 HEADS & CONTROLS IM587-B - Manual

LN-10 Heads & Controls
Boom Mount or Bench Models
OPERATOR’S MANUAL
IM587-B
August, 2007
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT
READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT.
And, most
importantly, think before you act
and be careful.
For use with: LN-10 Control - Boom Mount Code 10442, 10831
10 Series Wire Drive - Boom Mount Code 10443, 10444, 10763, 10764, 10818, 10819
LN-10 Boom Package Code 10445, 10765, 10820
Synergic 7F Drive C Code 10190, 10191
LN-10 - Bench Model Code 10440, 10441, 10761, 10762, 10816, 10817
LN-10 - Zipline Boom Package Code 10497, 10498 , 10771, 10772, 10824
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2007 Lincoln Global Inc.
RETURN TO MAIN MENU