Light & Motion VX2000 - Manual (Page 13)

25 24
Bluefin Bulkhead Installation
1) Remove the Rear Plate.
2) Locate the power switch on the circuit board on the inside of the Rear Plate.
Switch the appropriate switch (upper or lower) to ON. This activates power
to the bulkhead. (ref. fig. 29)
3) Using a flat head screwdriver or coin, remove the Port Plug (ref. fig. 30)
4) On the inside of the Rear Plate, remove the four button head cap screws
(Fig. 29)
(Fig. 30) (Fig.31)
(Fig. 32) (Fig. 33)
Monitor Instructions - Getting Started
Illustrated below are the components of the Bluefin External Monitor and the
Remote Monitor. Take time to identify and become familiar with each part.
Compact Monitor Components Remote Monitor Components
External Monitor Remote Monitor
Right Angle Bulkhead
for Bluefin Compact Monitor
Straight out Bulkhead
for Remote Monitor
Clamp Assembly Clamp Assembly
Monitor Cable Remote Monitor Cable
Lens Shade Lens Shade