Light & Motion VX2000 - Manual (Page 5)

8 9
Using the Bluefin VX2000 in Camcorder mode
Camcorder POWER switch should be set to MEMORY setting when installed
into the housing. When the rear plate is secured to the housing, the
camcorder will switch to CAM mode.
Left Smart Grip (ref. fig. 9)
LIGHTS -
After initial power up from battery pod, cycles lights through
output cycles. Press and hold for three seconds to turn lights
off.
PHOTO - Will record a video capture to Mini DV tape.
Still images captured in this manner will always
have a resolution of 640x480. Higher resolution
images may be captured using the Memory Stick.
PHOTO DIS. - Press to display thumbnails of images stored on Memory
Stick. Most recent image will be displayed first. Cycle through
stored images by pressing the FAR/- and NEAR/+.
FAR/- (dual function)
A) FAR : switches camcorder to manual focus and moves
focus point further from camcorder.
B)
- : displays previous image stored on Memory Stick.
PHOTO DIS must be pressed first.
NEAR /+ (dual function)
A.) NEAR : switches camcorder to manual focus and moves
focus point closer to camcorder.
B) +
: displays next image stored on Memory Stick. PHOTO
DIS must be pressed first.
Using the FAR/- and NEAR/+ to cycle through images on
Memory Stick will place the camcorder in manual focus
and will refocus the camcorder as you scroll through the
images. When you switch back to CAM mode press
AF/OFF to return to auto focus.
If REC is pressed while displaying thumbnails, the
displayed thumbnail will be recorded as part of the
composition of the video.
Front Plate
Flip Filter - Rotate lever to engage or disengage color correction filter.
Microphone - Microphone records sound to a depth of 80 ft.
(Fig. 6)
MICRO-
PHONE
FLIP
FILTER
(Fig. 7)
Housing Control
Exposure Dial - Activates camcorders manual Exposure.
ND LEVER - Controls camcorders ND filter position.
(Fig. 8)
(Fig. 9) (Fig. 10)
Exposure Dial Neutral Density Filter