Lincoln VANTAGE 500 - Manual (Page 27)

OPTIONAL FIELD INSTALLED ACCESSORIES
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20 amps each
and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may
not be compatible with NEMA common household receptacles.
K802-R POWER PLUG KIT - Provides four 120V plugs rated 15 amps each
and one dual voltage, full KVA plug rated at 120/240V, 50 amps, 120V plug is
compatible with NEMA common household receptacles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CONTROL -
Portable control provides same dial range as the output control on the welder
from a location up to the specified length from the welder. Has convenient
plug for easy connection to the welder. The Vantage 500 CUMMINS is
equipped with a 6-pin connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode
cable and 30 feet (9 m) of work cable, headshield, work clamp
and electrode holder. Cable is rated at 500 amps, 60% duty cycle.
K767-2 FOUR WHEELED STEERABLE YARD TRAILER
For in plant and yard towing.
K953-1 TRAILER - Two-wheeled trailer with optional fender and light
package. For highway use, consult applicable federal, state, and local laws
regarding possible additional requirements. There is a choice of 2 hitches,
a fender & a light package. Order:
K953-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-1 Fender & Light Kit
K965-1 Cable Rack
K887-1 ETHER START KIT - Provides maximum cold weather starting
assistance for frequent starting below 25
o F(-4 o C). Required Ether tank is
not provided with kit. (Cannot be used with K1858-1 Service Indicator Kit
at the same time.)
K1847-1 SPARK ARRESTOR KIT - Easily mounts to standard muffler.
K949-2 OIL DRAIN KIT - Includes ball valve, hose and clamp.
K1816-1 Full KVA Adapter Kit - Plugs into the 120/240V NEMA
14-50R receptacle on the case front (which accepts 4-prong
plugs) and converts it to a NEMA 6-50R receptacle (which
accepts 3-prong plugs) for connection to Lincoln Equipment with
a NEMA 6-50P plug,
K1858-1 Service Indicator Kit - Provides a GO / NO-GO visual indication of
air cleaner element useful service life. Filter service based on restriction
readings allows the longest life possible from the filter and best engine
protection. (Cannot be used with K887-1 Ether Start Kit at the same time.)
Pipe Thawing with an arc welder can cause fire, explosion,
damage to electric wiring or to the arc welder if done
improperly. The use of an arc welder for pipe thawing is not
approved by the CSA, nor is it recommended or supported
by Lincoln Electric.
-------------------------------------------------------------------------------------
C-1 ACCESSORIES C-1
Vantage 500 CUMMINS
WARNING