Land Pride 330-114A RC/RCM5020 - Manual (Page 7)

7 3/11/10 Manual No. 330-148M
Assembly Instructions
Center Deck Fixed Blade Assembly
(Part No. 330-304K)
Refer to Figure 7:
Attach center fixed blade assembly (#3) to the left front
corner of the center deck as follows:
1. Remove existing skid shoe bolt (#5) and discard.
2. Insert 1/2"-13 x 3" GR5 hex head cap screw (#5)
through top of deck and fixed blade assembly (#3).
Secure cap screw with hex whiz nut (#8).
3. Insert two 1/2"-13 x 1 3/4" GR5 hex head cap
screws (#7) through the fixed blade assembly and
out the front of the center deck. Secure cap screw
with hex whiz nut (#8).
4. Tighten hex whiz nuts to 76 ft-lbs.
Left Wing Fixed Blade Assembly
(Part No. 330-305K)
Refer to Figure 8:
Attach left wing fixed blade assembly (#1) to the left front
corner of the wing deck as follows:
1. Insert two 1/2"-13 x 1 1/4" GR5 hex head cap
screws (#4) up through the fixed blade assembly (#1)
and through the top of the left wing deck. Secure cap
screw with hex whiz nut (#8).
2. Insert two 1/2"-13 x 1 1/4" GR5 hex head cap
screws (#4) through the fixed blade assembly side
plate and through the side of the left wing deck.
Secure cap screw with hex whiz nut (#8).
3. Tighten hex whiz nuts to 76 ft-lbs.
Right Wing Fixed Blade Assembly
(Part No. 330-306K)
Refer to Figure 9:
Attach right wing fixed blade assembly (#2) to the right
front corner of the wing deck as follows:
1. Insert two 1/2"-13 x 1 1/4" GR5 hex head cap
screws (#4) up through the fixed blade assembly (#2)
and through the top of the right wing deck. Secure
cap screw with hex whiz nut (#8).
2. Insert two 1/2"-13 x 1 1/4" GR5 hex head cap
screws (#4) through the fixed blade assembly side
plate and through the side of the right wing deck.
Secure cap screw with hex whiz nut (#8).
3. Tighten hex whiz nuts to 76 ft-lbs.
Center Deck Fixed Blade Assembly (P/N 330-304K)
Figure 7
Left Wing Fixed Blade Assembly (P/N 330-305K)
Figure 8
Right Wing Fixed Blade Assembly (P/N 330-306K)
Figure 9
30152
3015
30152
30152