Land Pride 330-114A RC/RCM5020 - Manual (Page 8)

8 Manual No. 330-148M 3/11/10
Assembly Instructions
Rear Baffle Kit
Kit No. 330-585A
A detailed listing of parts for this accessory kit is provided
on page 11. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.
Right Rear Baffle Assembly
(Part No. 330-620K)
Refer to Figure 10:
1.
Locate right-hand rear baffle (#19). It is the baffle
with mounting plate extending pass the deflector on
the right side as shown. The mounting plate is flush
with the deflector on the left side.
2. Install right-hand rear baffle (#19) at the back of the
right wing deck by inserting 1/2"-13 x 1 1/2" GR5
round-head, square-neck bolts (#23) through the
deck’s rear curved plate first and then through the
rear baffle mounting plate as shown.
3. Secure bolt with hex whiz nuts (#24) and torque to
76 ft-lbs.
Left Rear Baffle Assembly
(Part No. 330-621K)
Refer to Figure 11:
1.
Locate left-hand rear baffle (#20). It is the baffle with
the mounting plate extending pass the deflector on
the left side as shown. The mounting plate is flush
with the deflector on the right side.
2. Install left-hand rear baffle (#20) at the back of the
left wing deck by inserting 1/2"-13 x 1 1/2" GR5
round-head, square-neck bolts (#23) through the
deck’s rear curved plate first and then through the
rear baffle mounting plate as shown.
3. Secure bolts with hex whiz nuts (#24) and torque to
76 ft-lbs.
Center Rear Baffle Assembly
(Part No. 330-622K)
Refer to Figure 12:
1.
Install center rear baffle (#21) at the back of the
center deck by inserting 1/2"-13 x 3 1/2" GR5 round-
head, square-neck bolts (#22) through the center
baffle first and then through the rear square tubing as
shown.
2. Secure bolts with hex whiz nuts (#24) and torque to
76 ft-lbs.
IMPORTANT: Existing rear guards will need to be
removed to install this kit. Be sure to save all
hardware with the guards should you choose to
reinstall the guards later. Do not operate cutter
without either the baffle or guard in place.
Right-Hand Rear Baffle Assembly (P/N 330-620K)
Figure 10
Left-Hand Rear Baffle Assembly (P/N 330-621K)
Figure 11
Center Rear Baffle Assembly (P/N 330-622K)
Figure 12
RH: Mounting plate extends pass the deflector on the right side.
19
24
23
30151
LH: Mounting plate extends pass the deflector on the lift side.
24
23
20
30151
22
24
21
30151