Lumens Technology PS750 - Manual (Page 27)

English - 26
8.13.3. Playing image
1. Press [PLAYBACK] on the remote control or control panel to
display thumbnails of all videos recorded.
2. Press [] or [] or [] or [] to select files to browse.
3. Press [ENTER] for full-screen play.
4. Press [] or [] to adjust the volume of the video.
<Note> When motion images are played back, the volume of
Audio Out can be controlled by up/ low arrow keys. In any other
modes, you are not allowed to control volume using [] or []
key.
5. Press [] or [] to turn to the previous/next video.
6. Press [SOURCE] to exit.
<Note> Only the files recorded can be played, and when live
sound output is not available, additional amplifier can be
connected to AUDIO OUT.
8.14 I would like to switch a part of the live image
(PAN)
Use Remote control:
1. Press [PAN] to enter the image pan mode.
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
8.15 I would like to play the slides (Slide Show)
8.15.1 Setting the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find the [Slide Show Effect].
4. Press [] or [] to select image switch mode between [Off / Shutter /
Right / Down / Side / Open].
5. Press [MENU] to exit.