Lumens Technology PS750 - Manual (Page 31)

English - 30
8.20.2.4 When the installation is completed, press [Finish] to end the
installation procedure.
8.20.3 Setting procedure
8.20.3.1 Click[Start]/[Programs]/[Projector Setup]
8.20.3.2 When the procedure is started, a setting window will pop up.
8.20.3.3 Press [CONNECT] to set up the connection. [Com Port]
lamp flashing green indicates a successful connection.
8.20.3.4 Press [Select Projector] to select the projector type and
display information.
8.20.3.5 Press [Program] to switch PS750 settings.
[Note] If any setting is modified, press [Save as] to set up a
“*.txt” file
for setting storage.
8.20.3.6 When the setting is completed, press [Exit] to exit.
 
