Lumens Technology PS750 - Manual (Page 28)

English - 27
8.15.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or [] to select image switch mode between [0.5 Sec / 1
Sec / 3 Sec / 5 Sec / 10 Sec / Manual].
5. Press [MENU] to exit.
8.15.3 Activating/Stopping the slide show
<Note> Images over 8 MB, cannot be played.
If you use the remote control or the control panel:
1. Press [SLIDE SHOW] to start playing.
2. Press [SLIDE SHOW] again to stop playing.
8.16 I would like to view the X-ray film
1. Place an X-ray film to be displayed under the camera.
2. Press [Lamp] button on the control panel to switch on the Backlight (in
the sequence of arm lamp/backlight/OFF)
3. Press [AUTO TUNE] button to optimize the image.
8.17 I would like to compare images (PBP)
This function will compare and contrast a live image with a captured image.
Use Remote control
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection
screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [] or [] to move the image left or right.
<Remark> Press [ENTER] to switch between the captured and
live images.
Captured Image Live Image
C1
C3
C2
C4
C5 C6 C7