Lucent Technologies DEFINITY EXTENDER 1100 - Manual (Page 30)

Introduction
1-2 Issue 1 June 1998
System Operation and
Configuration
The DEFINITY Extender 1100 System is designed for use with a
DEFINITY ECS of Release 3, Version 3 or later. The DEFINITY
Extender 1100/1101 System consists of two modules. One
module, identified as the Switch Module, connects to your
DEFINITY ECS. The other module, identified as the Remote
Module, connects to your DEFINITY ECS telephone at your off-
premise location. Figure 1-1 shows the DEFINITY Extender
1100/1101 System configuration.
Figure 1-1. System Configuration
The modules commu
Figure 1-1. System Configuration
The modules communicate via a single two-wire voice-grade
circuit that can extend your DEFINITY

ECS telephone to virtually
unlimited distances. See “Specifications” later in this chapter for
detailed circuit specifications.
Figure 1-1. System Configuration